Building and/or Upholstering Restaurant Booths
Click on small Image for a larger image.
|
 |
Finished booth with privacy screen waiting for delivery
|
 |
Seat frame construction steps.
|
 |
Seat frame construction steps.
|
 |
Seat frame construction steps.
|
 |
Seat frame construction steps.
|
 |
Seat frame construction steps.
|
 |
attaching front face piece to seat frame
|
 |
completed seat frame.
|
 |
nailing no-sag spring clips to seat frame.
|
 |
springing up seat frame.
|
 |
applying rubber cove molding to "kick".
|
 |
applying foam to "base".
|
 |
completed kick and base upholstery.
|
 |
applying foam to "back".
|
 |
applying foam to sides of back.
|
 |
applying dacron to back.
|
 |
tailoring (fit/cut) back cover (fabric).
|
 |
staple down back sides.
|
 |
staple down back underneath seatline.
|
 |
completed back.
|
 |
double layer burlap over springs.
|
 |
applying underpad (same as fibre carpet padding).
|
 |
foaming "bullnose" (this is what gives the booth its pronounced front curve).
|
 |
foaming "bullnose" (this is what gives the booth its pronounced front curve).
|
 |
spraying adhesive in preparation for applying seat foam.
|
 |
applying seat foam.
|
 |
tailoring seat foam.
|
 |
apply and tailor foam on side of seat.
|
 |
applying dacron using spray adhesive.
|
 |
attaching tailored cover to seat.
|
This How-to is Credited to:
UpholsteryShop Oregon, Inc.
7909 N Smith St
Portland, OR 97203
503/285-7377
www.upholsteryshop.org
E-Mail
|
